This page describes how to use the Criteria filter box of the Create a Static Line Item.
The Static Line Item page Criteria box allows you to type or select one or more criteria. These criteria filter the list of available faces, from which you can then make a selection.
In the Static Line Item page, you can type a criterion name in the Criteria box or browse through the list of criteria available.
When selecting more than one criteria in the Criteria box, an AND operation is applied between each of them. As a result, the Guaranteed Campaigns module will display faces that apply to all of the selected criteria. This allows you to narrow down the selection.
For example:
In the Criteria box, select two criteria, such as “Chicago” and “Foods”. Guaranteed Campaigns narrows down the selection to all faces in “Chicago” that are located in or near “Foods”.
To utilize the Contextual filter for precise geographic targeting, ensure your screens possess valid latitude and longitude coordinates. These coordinates determine the screen's location and enable accurate targeting within the filter.
You can verify and modify these coordinates directly within the Display Unit settings in our Content and Network Management solution. Detailed instructions on managing Display Unit information, including location settings, can be found in the Display Units section of the Content and Network Management documentation.
Yes ! You need to start by applying a Contextual filter and then apply criteria filter on top of that.
Also, we will bring criteria targeting inside the Contextual filter in the coming months to facilitate that workflow.
Yes.
In the Guaranteed Campaigns module, a screen can refer to a single screen, a single frame on a screen, or a group of screens, for example, a video wall.
A screen is not defined in the Guaranteed Campaigns module.
Display Units, Frames, and Day Parts that your admin has set up in the Content and Network Management solution are translated into screens when imported into the Guaranteed Campaigns module. For more information, refer to On-Board Screens in the Guaranteed Campaigns Module.
Screen groups allow you to sell multiple screens as a single entity rather than individually. This enables selling based on quantity over specific screens and selling inventory as groups.
- Screen groups cannot be created in the Guaranteed Campaigns module. They are created in and imported from our Content and Network Management solution.
- A screen group consists of display units (screens) assigned the Grouping display unit criteria type. All other criteria types are not supported for creating screen groups.
- One or more display units must be associated with a particular criterion.
Note: If a screen is assigned to a Grouping Criteria, it will stop appearing as an individual screen in the Guaranteed Campaigns module.
For example, the grouping criteria could be called Car 12345.
For more information on how to create a screen group, see the Screen Groups tutorial in the Content and Network Management documentation.
The price of a line item depends on the type of buy used.
The Suggested Price calculation for a Budget Goal-based line item is given by the budget value and calculates the possible achievable impressions using the CPM (Cost per thousand impressions) value set at the rate card level of each screen. For more information, see Add and Edit Rate Cards.
The Suggested Price calculation for Frequency-based line items uses the screen rate card price value, and prorates it based on the Ad Settings and the rate card specification. For more information, see Add and Edit Rate Cards.
Example 1:
Given the following rate card attributes for Screen A:
- Ad flight = 14 Days
- Ad duration = 10s
- Price = $100
The estimated price for a Screen A, for an ad with the following attributes, is $50:
- Ad flight = 7 Days
- Ad duration = 10s
- Frequency = 1 Play per loop
Example 2:
Given the following rate card attributes for Screen A:
- Ad flight = 14 Days
- Ad duration = 10s
- Price = $100
The estimated price for a Screen A, for an ad with the following attributes, is $150:
- Ad flight = 14 Days
- Ad duration = 15s
- Frequency = 1 Play per loop
Example 3:
Given the following rate card attributes for Screen A:
- Ad flight = 14 Days
- Ad duration = 10s
- Price = $100
The estimated price for a Screen A, for an ad with the following attributes, is $200:
- Ad flight = 14 Days
- Ad duration = 10s
- Frequency = 2 Plays per loop
The Suggested Price calculation for an Impressions Goal-based line item uses the CPM (Cost per thousand impressions) value set at the rate card level of each screen. For more information, see Add and Edit Rate Cards.
For example, given the following information:
- Screen A CPM = $5
- Screen B CPM = $7
When the impression goal that you set is 500,000 impressions and it is distributed 300,000 on screen A and 200,000 on screen B, based on the available impressions, the total suggested price would be $2,900 ($1,500 for screen A + $1,400 for screen B ).
The Suggested Price calculation for the Play Goal uses the fixed price of the rate card associated with the screen selection.
To calculate the price, the system calculates the price of a single play using the following information:
- fixed price
- flight duration
- ad duration on the rate card
- loop duration set on the screen
Let’s take for example a screen with a loop length of 180s, and a rate card with the following information:
- Ad flight = 1 day
- Ad duration = 10s
- Price = $100
For a loop length of 180s, 1 play per loop for 1 day totals 480 plays.
The Suggested Price for a single play for that screen is thus $100 / 480 = $0,21.
The Suggested Price calculation for Fixed SoV-based line items uses the screen rate card price value, and prorates it based on the Ad Settings and the rate card specification. For more information, see Add and Edit Rate Cards.
Example:
Given the following rate card attributes for Screen A:
- Ad flight = 1 Day
- Ad duration = 10s
- Price = $100
The estimated price for a Screen A, for an ad with the following attributes, is $100:
- Ad flight = 30 Days
- Ad duration = 10s
- Share = 16.67% (1 Play per loop)
See Fixed SoV.
The Suggested Price calculation for Average SoV-based line items uses the screen rate card price value, and prorates it based on the Ad Settings and the rate card specification. For more information, see Add and Edit Rate Cards.
Example:
Given the following rate card attributes for Screen A:
- Ad flight = 1 Day
- Ad duration = 10s
- Price = $200
- Screen has a 60s loop length
Given the following rate card attributes for Screen B:
- Ad flight = 1 Day
- Ad duration = 10s
- Price = $100
- Screen has a 60s loop length
By booking a 50% Share of Voice with 10 seconds ad duration, the result is 3 Plays per Loop (PPL).
- Screen A – 3PPL x $200 = $600
- Screen B – 3PPL x $100 = $300
This gives a total of 900$.
Note: Availability and distribution are not taken into account when calculating the Suggested Price for one day.
See Daily Average SoV, Daily Average Per Screen SoV, and Campaign Average SoV.
